Page 1
W 750-100 W 750-115 W 750-125 W 850-100 W 850-115 W 850-125 WP 850-115 WP 850-125 WEV 850-125 W 1100-115 W 1100-125 WP 1100-115 WQ 1100-125 WEQ 1400-125 de Originalbetriebsanleitung 5 Alkuperäiset ohjeet 66 en Original instructions 13 no Original bruksanvisning 73...
2. Proper Use sories cannot be adequately guarded or controlled. f) Treaded mounting of accessories must The angle grinders, when fitted with original Metabo match the grinder spindle thread. For accessories, are suitable for grinding, sanding, accessories mounted by flanges, the arbour...
Page 6
ENGLISH I) Never lay the power tool down until the Safety Warnings Specific for Grinding accessory has come to a complete stop. The and Abrasive Cutting-Off Operations: spinning accessory may grip the surface and pull a) Use only wheel types that are recommended the power tool out of your control.
Page 7
The adjustments, converting or servicing the machine. protruding wheel may cut gas or water pipes, elec- Metabo S-automatic safety clutch (WQ 1100-125, trical wiring or objects that can cause kickback. WEQ 1400-125 only). When the safety clutch...
Designed for work with roughing wheels, flap sanding pads, diamond cutting discs. Only for WQ1100-125; WEQ 1400-125. W 750-100, W 750-115, W 750-125, W 850-100, Do not use the "M-Quick" clamping nut if the W 850-115, W 850-125, WP 850-115, WP 850-...
Page 9
ENGLISH en - Turn the grinding wheel firmly clockwise to tighten Note: If the clamping nut is very tightly secured (14), the "M-Quick"clamping nut. you can also use a two-hole spanner to unscrew it. Releasing the “M-Quick” clamping nut (1): 8.
Repairs to electrical tools must ONLY be 9. Cleaning carried out by qualified electricians! Contact your local Metabo representative if you Particles may become deposited inside the power have Metabo power tools requiring repairs. See tool during operation. This impairs the cooling of the www.metabo.com for addresses.
Page 11
ENGLISH en = Rated input power = Power output = Weight without mains cable Measured values determined in conformity with EN 60745. Machine in protection class II AC power The technical specifications quoted are subject to tolerances (in compliance with relevant valid standards).
Need help?
Do you have a question about the W 750-100 and is the answer not in the manual?
Questions and answers