Cable Attachment
Cable Attachment
NOTE - If you are stood behind the
lawnmower:
OPC Cable: This attaches to the lever in front
of the main handlebar and if followed, will
attach to the engine.
STEP 1
Gently prise the lever from its locating hole in
the main handlebar.
STEP 2
Insert the end of the cable in to the hole
in the lever.
16
STEP 3
Position the cable until it lies flat in
the lever.
STEP 4
Refit the lever back into its location hole on
the main handlebar (lower hole).
Check the cable lies flat and has not snagged
on any other part of the lawnmower.