Figure 1-5 Connect The UTP Cable To In-House Lan Connection Box
To connect the OfficeConnect Remote to in-house
LAN:
Connect the UTP cable (not supplied) into RJ45
1
socket marked LAN on the OfficeConnect Remote.
Connect the other end of the cable into the female
2
socket of the in-house LAN connection box, as shown
in
Figure
1-5, or directly to a 10BaseT hub port.
Using the Rubber Feet and Stacking Clips
Connecting to a Single Workstation
To connect the OfficeConnect Remote to a single
personal computer or workstation:
Implement the crossover for the 10BaseT port on
1
the OfficeConnect Remote by setting the MDI/MDIX
switch to MDIX (out).
Connect the UTP cable (not supplied) directly into the
2
RJ45 socket marked LAN on the OfficeConnect
Remote.
Connect the other end to the 10BaseT socket on the
3
workstation's Ethernet adapter.
1-15