Table of Contents
Advertisement
Connecting to a different network
The Profile Management tab has an Available Networks button that enables you
to view and connect to different networks.
To connect to a different network, do the following:
1. In the Profile Management tab, click a configuration profile.
2. Click Available Networks to open the Available Access Points and Ad Hoc
Networks window.
This window displays the available access points and ad hoc network for the
station. This includes the network names, security, signal strength, frequency,
channel number, and wireless mode.
3. To connect to an available network, double-click the network in the window. If
a configuration profile exists for that network, the Profile Management window
opens and displays the settings for the network that you selected.
Note: The Profile Management window has a Refresh button that you can
click to manually update the information shown.
Viewing statistical information
The Diagnostics tab in the IBM Client Utility window is a read-only screen that
shows the following receive and transmit diagnostics for frames received by or
transmitted by the CardBus Adapter:
v Multicast frames transmitted and received
v Broadcast frames transmitted and received
v Unicast frames transmitted and received
v Total bytes transmitted and received
17
Installation guide
Advertisement
Table of Contents
