True Fitness Z7 Series Owner's Manual page 20

Tuning Your Workout
: O G D
FOUR PERATION IN REATER ETAIL
To change level during your workout, press . Press keys
to change level, then press . If a new program is selected, it will
join that program at the same point as the previously selected pro-
gram.
To change to another pre-set program, press one of the Express
Command Keys, then press
. The treadmill joins the workout
in progress at the same elapsed time as the previous workout.
To reset distance, time, and calories during your workout, press and
hold until zeros appear in the time, distance, calorie windows.
To reset the treadmill back to workout setup mode, press and hold
for three seconds.
Note: All workouts can be set from 5 to 99 minutes, with the timer
counting down from your chosen workout time. The default value
(if no time entered) is 30 minutes. When the timer reaches 0:00 it
will beep and begin counting up. You must press to end your
workout.
R '
Some users may prefer a minimal data display. When the treadbelt is
UNNER S
M
moving, pressing the Advanced Options key will remove the prog-
ODE
ress matrix, speed, and grade readouts. The data readouts will then
be Elapsed Time, Distance, and Pace (with heart rate displayed if
available).
Pressing or returns the display to normal operation.
Z 7 T r e a d m i l l O w n e r ' s G u i d e
29