Service; General - Shop fox W1867 Owner's Manual

Model W1867/W1868/W1869 (For Machines Mfd. Since 11/18)

General

This section covers the most common service adjustments
or procedures that may need to be made during the life
of your machine.
If you require additional machine service not included
in this section, please contact Woodstock International
Technical Support at (360) 734-3482 or send e-mail to:
techsupport@woodstockint.com.
Removing/Replacing.
Canister.Filter.&.Bag
If the canister filter is clogged or dirty and cleaning
it does not improve dust-collection performance, the
canister filter must be replaced.
Item(s).Needed.
An Assistant ......................................................1
Wrench or Socket, 12mm ......................................1
Wrench or Socket, 10mm ......................................1
Hex Wrench, 5mm ..............................................1
Shop Vac ..........................................................1
Canister Filter D4892 (Models W1867, W1868) .............1
Canister Filter D4895 (Model W1869) ........................1
Filter Bag D4893 ................................................1
To.remove.and.replace.filter.bag.and.canister.filter,.do.
these.steps:
1. DISCONNECT MACHINE FROM POWER!
2. Release bag clamp, then remove filter bag (see
Figure.59). Tie bag closed.
3. Loosen M6-1 x 16 hex bolt on filter cleaning handle,
then remove handle (see Figure.60).

SERVICE

Dust. exposure. created. while. using.
machinery. may. cause. cancer,. birth.
defects,. or. long-term. respiratory.
damage.. Always. wear. goggles. and. a.
NIOSH-approved.
working. with. the. dust. collection. bags.
or.canisters.
Qty
Figure.60. Filter cleaning handle hex bolt.
-41-
respirator.
Figure.59. Filter bag components.
Hex Bolt
Cleaning
Handle
when.
Canister
Filter
Bag
Clamp
Filter
Bag
Filter