Assembly - Shop fox W1867 Owner's Manual

Assembly

Before beginning the assembly process, refer to Items.
Needed.for.Setup and gather everything you need.
Ensure all parts have been properly cleaned of any
heavy-duty rust-preventative applied at the factory (if
applicable). Be sure to complete all steps in the assembly
procedure prior to performing the Test.Run.
IMPORTANT: When assembling any components with a
gasket, tighten fasteners in an alternating star pattern to
ensure an even seal and reduce the risk of air leaks (see
Figure.9).
To.assemble.dust.collector,.do.these.steps:
1. Attach (4) 2
⁄ " locking swivel casters to bottom of
1
2
base, and secure each caster with (4)
flange bolts (see Figure.10).
Model W1867/W1868/W1869 (For Machines Mfd. Since 11/18)
Figure.9. Alternating star pattern for
tightening fasteners of components
⁄ "-18 x ⁄ "
5 1
16 2
Figure.10. Locking swivel caster (1 of 4)
-18-
HEAVY LIFT!
Straining or
injury may occur from
improperly lifting the
machine or some of its
parts. To reduce this
risk, get help from other
people and use a forklift
(or other lifting equip-
ment) rated for weight of
machine.
1
5
3
7
2
assembled with a gasket.
x 4
attached to base.
crushing
8
4
6