Powering The Camera On - Huawei 200 Quick Start Manual

Matched CloudLink Meeting PC Client
Directly connect the Camera 200 to a PC with a USB cable after it is turned on.
Start the Huawei CloudLink Meeting PC client. Go to the menu and go to
Settings > Media > Video Device and select HUAWEI Camera 200.
Sleep Mode:
Use the IR remote control to set the sleep mode. Press MENU, go to Main
Menu > Settings > USB Auto Sleep to set the sleep parameters.
By default, the sleep mode is set to ON:
The camera will automatically enter sleep mode after the video conference on the
PC ends. If there is no image output from the HDMI or USB port, the PTZ rotates
lower leftwards and the indicator turns steady orange. Once the PC client rejoins a
conference, the camera will automatically awaken.
Setting the sleep mode to OFF:
In this case, after a video conference on the PC ends, the HDMI port will keep
outputting images, the PTZ stays as it is, and the camera keeps working. The
camera quickly displays images the moment the PC client rejoins the conference.

Powering the Camera On

Connect the cables, power adapter to the camera, and press the power button. About 25 seconds
later, video will display. The camera faces forward the first time it is powered on. The camera
PTZ location can be set to 0# preset position so that it turns to the pre-set position upon reboot.
Checking the Status Indicator
Steady green: normal operation
Steady orange: sleep mode
Blinking orange: camera upgrade
8