Troy-Bilt 664D, 665B, E666M Operator's Manual page 9

Models 664D & E666M
13
REF. PART
No. No. DESCRIPTION
1 710-3105 Hex Hd. Screw, 3/8-16 x 1-1/4*.......... 16
2 GW-1270-2A Bolo Tine-single. Right hand tine
used on left side of tiller. (Incl.
two ea. Refs. 1 and 3) .....................
3 712-0375 Hex Locknut, 3/8-16 ...........................
5 710-3096 Hex Hd. Screw, 3/8-16 x 2, Grade 8....
7 GW-1270-1A Bolo Tine-single. Left hand tine
used on right side of tiller. (Incl.
two ea. Refs. 1, 9 and 10) ...............
8 1902154010 Tine Holder. For left and right sides ....
-- 1901118 Bolo Tine Replacement Set (Incl. eight
ea. right hand and left hand tines,
and sixteen ea. Refs. 1 and 3) .........
* Specify GRADE 5 if ordering part locally.
BOLO TINES, WHEELS
13
REF. PART
QTY. No. No.
-- GW-2475-1
-- GW-2475-2
8
2 -- GW-10802
2
8 9 712-3017
2 10 736-0169
11 GW-9380
12 GW-9338
1 13 1917487
Parts List
NOTE 1: Custom Tilling Tines are
available for your tiller. These are
special hard-faced tines that are
thicker than standard tines.
IMPORTANT: Left and right sides of
tiller are determined by standing in
operator position and facing direc-
tion of forward travel.
DESCRIPTION
Custom Tilling Bolo Tine, Left hand
tine (see Note 1 above) ...................
Custom Tilling Bolo Tine, Right hand
tine (see Note 1 above) ...................
Custom Tilling Bolo Tine Replacement
Set (Incl. eight ea. right hand and
left hand custom tines, and sixteen
each of Refs. 1 and 3) .....................
Hex Nut, 3/8-16................................... 16
Lock Washer, 3/8 ................................ 16
Clevis Pin, .312 x 1-3/4 ......................
Hitch Pin .............................................
Wheel and Tire Assembly ...................
35
QTY.
8
8
1
2
2
2