Dynojet Power Commander V Installation Instructions page 5

FIG.G
FIG.H
Ground
I14-033 www.powercommander.com
10 Attach the connectors with the green wires from the PCV to the front cylinder
ignition coil and stock wiring harness connector as shown in Figure G.
11 Attach the connectors with the blue wires from the PCV to the rear cylinder
ignition coil and stock wiring harness connector as shown in Figure G.
12 Attach the ground wire from the PCV harness to the case bolt on the left side
of the engine as shown in Figure H.
13 Reinstall the fuel tank and seat.
2014-2016 Ducati M1200 - PCV F/I - 5