Final Procedures - Triax CGSD 162 Assembly Instruction Manual

6 f
i n a l
After installing the head-end station, retrofitting accessories or installing mod-
ules it is necessary to tighten all cable connections, F terminals and cover screws
in order to maintain compliance with current EMC regulations and to ensure a
reliable operation.
• Securely tighten the cable connections (F connector) using an open-ended
spanner (spanner gap 11 mm).
• Programme the modules connected and the head-end station if necessary.
• Position the breakthroughs in the base plate above the fastening screws
• Push the base plate in direction of the arrow and lock it with the locking
screw
• Tighten the fastening screws
• Tighten the nuts of retrofitted F terminals if applicable.
• Mount the front cover (see the assembly instructions of the head-end station).
pro C e d u res
.
1
2
.
2
1
2
- 9 -
.
2
2
CGSD 162