Meaning Of The Symbols Used; Technical Data; Description - Triax CGSD 162 Assembly Instruction Manual

2.2 m
e a n i n g
•
2.3 t
e C h n i C a l
The requirements of the following are met:
2011/65/EU, 2014/30/EU, 2014/35/EU
The product fulfils the guidelines and standards for CE labelling.
Unless otherwise noted all values are specified as "typical".
Frequency range: ....................................................... 950 ... 2150 MHz
SAT IF inputs: ......................................................................... 2 F sockets
SAT IF loop-through output: ....................................................... 1 F socket
SAT IF outputs: . ................................................................. 6 + 4 F sockets
Input / output impedance: .............................................................. 75 Ω
Decoupling of the outputs: ..............................................................20 dB
Loss 1-6 fold (see page 5): . ......................................................9 ... 14 dB
Loop-through loss: ............................................................................8 dB
Loss 1-4 fold (see page 5) . .......................................................9 ... 12 dB
LNB operating voltage supply (via external connector): ....... max. 800 mA
2.4 d
es C r i p t i o n
The SAT IF distributor CGSD 162 is equipped with two SAT IF inputs, one loop-
through output and 10 SAT IF outputs. This enables to distribute two reception
areas to 4 and 6 SAT IF outputs. Using the loop-through output the reception
area 1 can be distributed to the 10 outputs. The F sockets of both reception
areas are marked with different colours.
o f t h e s ym b o l s u s e d
Important note
Performing works
data
- 4 - CGSD 162