Grandstream Networks GSC3570 Quick Installation Manual page 5

Port
Jack Function
Pin Signal Color
1 COM1 Orange
1 Relay output, normal open or close, max 125VAC/0.5A or max
2 NO1 Yellow Alarm OUT
DC 30V/2A
3 NC1 Green
Alarm isolated input, for voltage signal detection, IN+ connect the
Alarm IN
4 IN+ White sensor's signal output, please connect the GND to Alarm device's
(Active)
GND or Negative of power. Active voltage range 9-15V
J1
5 GND Black Alarm GND Voltage reference for IN+, Switch signal reference for AIN (1/2/3)
6 AIN1 Blue
Alarm IN Alarm input, for button/door contacts switch signal detection.
7 AIN2 Brown
(Passive) Please connect the Switch/button to AIN (1/2/3) and GND
8 AIN3 Gray
9 GND Black DC12V recommend, input voltage rang 9-15V Current at least 1A
Power Supply
10 +12V Red @12V
- POE supply Dual 10/100 Mbps Network ports: One is POE port with class AF
J2 Network Port
- LAN port mode. The other one is a LAN port
J3 Micro SD Port Data storage Support microSD/SDHC/SDXC, up to 256G
Data exchange port, Not recommended to use this port to power
J4 Micro USB Port Data exchange
supply. If needed, please use 5V/2A adapter.
GSC3570 CONFIGURATION
Configure the GSC3570 Using a Web Browser:
1. Ensure your device is powered up and connected to the Network.
2. Slide to the second home page and press "Setting"
3. Select "Network Status" to check the IP address.
4. Type the unit's IP address in your PC browser. (See figure below).
5. Enter admin's username and password to access the configuration menu.
(The factory default username is "admin" while the default random pass-
word can be found on the sticker at the back of the unit).
Configure the GSC3570 from the LCD MENU:
1. Make sure the device is idle.
2. Slide to the second home page and press "Setting". Browse the
GSC3570 MENU for Status, Network information, Features and Basic/
Advanced Settings...
3. Press "Home" Button to go back to Idle screen.
Refer to online documents and FAQ for more detailed
information: http://www.grandstream.com/our-products
Remark
~5~
ZH
GSC3570不预设对医院，执法机构，医疗中心(急救服务)以
及各种紧急服务的紧急通话服务。用户必须自行设定紧急
通话功能。用户必须自行购买SIP兼容的网络电话服务，正
确的设定GSC3570使用该服务，并定期测试您的配置以确保
GSC3570如预期工作，否则请购买传统无线或有线电话服务
来拨打紧急通话。
Grandstream Networks
务。Grandstream Networks 公司、其管理者和员工以及其相关
机构对此所造成的任何索赔、损失或者损害都不负有任何法
律追究责任。在此，您将无权对任何以及所有由于无法通过
GSC3570拨打紧急电话以及没有遵照前段文字描述而造成紧
急通话失败的事件提出诉讼。
GNU GPL许可条款已包含在设备固件中，可以通过设
备的Web用户界面 my_device_ip/gpl_license 进行访问。
也可以通过以下链接访问：http://www.grandstream.com/legal/
open-source-software
如果需要包含GPL源代码信息的CD，请发邮件到
info@grandstream.com 提交请求 。
公司的GSC3570不支持紧急通话服
~6~