Connecting Your System - Night Owl C50XFR Series Quick Setup Manual

Connecting Your System

HDMI
Plug included HDMI cable into
1
the HDMI port on the back of
the DVR.
USB
Plug the USB mouse into the USB
3
port on the back of the DVR.
ETHERNET
5 Plug the other end of the
Ethernet cable into a numbered
port on the back of the router.
NOTE:
view cameras, TV/Monitor must be tuned to
the same Input the HDMI is plugged into.
2
ETHERNET
4
(Router Not
Included)
DISCLAIMER:
STOP:
each camera locally to confirm they
function properly.
Monitor is required for initial setup. To
Plug the other end of the
HDMI cable into the back
of the TV or Monitor.
Plug the included Ethernet
cable into the LAN port on
the back of the DVR.
Camera/cable quantities may vary.
BEFORE installing, test
2