Connecting Your System - Night Owl H2THD Quick Setup Manual

Connecting Your System

HDMI
SYNC WIRED /
Plug included HDMI cable into
1
the HDMI port on the back of
the DVR.
SYNC WIRED /
USB
Plug the USB mouse into the USB
3
port on the back of the DVR.
ETHERNET
Plug the other end of the
5
Ethernet cable into a numbered
port on the back of the router.
3
QSG-H2THD.indd 4
SYNC WIRED /
(Router Not
Included)
HDMI
NOTE: Monitor is required for initial setup.
view cameras, TV/Monitor must be tuned to
the same Input the HDMI is plugged into.
Plug the other end of the HDMI
2
cable into the back of the TV
or Monitor.
ETHERNET
4 Plug the included Ethernet cable
into the LAN port on the back of
the DVR.
DISCLAIMER: Camera/cable quantities may vary.
STOP: BEFORE installing, test
each camera locally to confirm they
function properly.
To
2018/6/22 11:00