Advertisement
Connecting Your System
HDMI
1
Plug one end of the included
HDMI cable into the HDMI
port on the back of the DVR.
ETHERNET
3
Plug one end of the included
Ethernet cable into the LAN
port on the back of the DVR.
FROM CAMERA
TO CAMERA
Make sure you twist and lock BNC connectors
Audio enabled cameras will have a white RCA
connector to transmit audio signal (Optional).
5
Connect the ends of the cable
attached to the camera to the
ends of a video/power cable
labeled TO CAMERA ONLY.
3
HDMI
You may also connect using VGA (not included)
2
Plug the other end of the HDMI
cable into the back of your
TV or monitor.
Router Not
Included
ETHERNET
4
Plug the other end of the Ethernet
cable into a port on the back
of your router.
6
Connect the BNC connector of
the video/power cable labeled
TO DVR ONLY to an open video
input on the DVR.
7
To ensure all cameras are
working, please test each one
locally before installing them.
The DVR power adapter is
labeled Power supply for DVR
The Camera power adapter is
labeled Power supply for Camera
9
Ensure you are using the
correct power adapter when
setting up your system.
11
Connect the DVR power adapter
to the Power Input on the rear of
the DVR.
Power cable
Power splitter
connectors
connectors
8
Connect the female power
leads of the BNC cables to the
male power splitter ends.
Camera Power
Adapter
Power
Surge
splitter
Protector not
included
10
Connect the power splitter to the
camera power adapter and plug
the adapter into a surge protector or
Uninterruptible Power Supply (UPS).
Surge
Protector not
included
12
Plug the DVR power adapter into a
surge protector or Uninterruptible
Power Supply (UPS).
4
Advertisement
