Relative Pressure Reading; Sensor Reception Indicators - La Crosse Technology CA80550 Instruction Manual

R E LATI V E PR E SS UR E R EA DING
• Your station itself has a Pressure Sensor inside to provide accurate Relative Pressure
readings.
• The station will default to a Relative Pressure of 29.92 Inches of Mercury.
• Give it up to 3 days to automatically adjust to your environment.
• The Relative Pressure number is programmable in the Settings Menu.
• You can select INHG (Inches or Mercury) or HPA (Hecto Pascal) for Pressure units in the
Settings Menu.
• The UP and DOWN Arrows indicate the Pressure Tendency (rising or falling). This is
calculated when the average value of the current hour's barometric pressure is compared
to the average of the past 3 hours. If the difference is greater than +1hpa, the air pressure
trend will increase; if the difference is less than -1hpa, the air pressure trend will decrease; if
it is between +1 and -1hpa, it will be flat.
Press the EXTRA button to switch between any extra sensor readings and Relative
Pressure reading.
S E N S O R R ECE PT I ON INDI CATORS
There are Sensor Reception Indicators for your Temperature/Humidity Sensor, and Wind
Sensor.
• When indicator is solid, sensor is connected.
• When indicator is flashing, it is searching for the individual sensor.
• If there is no indicator, the sensor is not connected.
WI-FI WIND & WEATHER STATION
PRESSURE
INHG
EXTRA SENSOR
Page | 27