Miele PDR 507 HP Operating And Installation Instructions page 15


WARNING: Never switch the tumble dryer off before the end of
the drying programme unless all items are removed immediately and
spread out to cool down.

Fire hazard!
This tumble dryer must not be connected to a controllable socket
(e.g. a timer or a peak-load switch-off device).
The tumble dryer may only be operated with a peak-load device if
this is connected to the tumble dryer via the Miele XCI box and the
relevant settings have been configured on the tumble dryer.
There is a risk of the laundry self-igniting if the drying programme is
cancelled before the cooling phase has finished.

To prevent the risk of fire, the following textiles must never be
dried in the tumble dryer:
– Items which have been cleaned using industrial chemicals (e.g.
professional dry-cleaning agents).
– Fabrics which contain a large proportion of rubber, foam rubber or
rubber-like materials. For example, products made from latex
foam rubber, shower caps, waterproof textiles, rubberised articles
and items of clothing and pillows with foam rubber filling.
– Fabrics which contain padding or fillings which are damaged (e.g.
pillows, jackets). The filling could fall out and cause a fire.

The programme finishes when the cooling phase has been
completed. Many programmes are followed by a cooling phase to
ensure that the items are not too hot to handle when you remove
them (this also reduces the risk of the laundry self-igniting).
Make sure that you do not remove the laundry until the programme
has finished.
Warning and Safety instructions
15