Fcc Regulations - Canon CN20x50 Series Operation Manual

Zoom lens
Hide thumbs Also See for CN20x50 Series:
Table of Contents

Advertisement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
We, Canon Inc., in Japan and CANON EUROPE LTD., in U.K., confirm that the zoom lens is conformity with
the essential requirements of EC Directive(s) by applying the following standards:
EN55103-1 and EN55103-2
Note:
a)
Applicable Electromagnetic Environments:
E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors) and E4 (controlled EMC
environment, ex. TV studio).
b)
Use of shielded cable is required to comply with limits specified by above standards.
Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschafts- und Gewerbebereich sowie in Kleinbetrieben
vorgesehen.
Only for European Union and EEA (Norway, Iceland, and Liechtenstein)
This symbol indicates that this product is not to be disposed of with your household waste,
according to the WEEE Directive (2012/19/EU) and national legislation. This product should be
handed over to a designated collection point, e.g., on an authorized one-for-one basis when
you buy a new similar product or to an authorized collection site for recycling waste electrical
and electronic equipment (EEE). Improper handling of this type of waste could have a possible
negative impact on the environment and human health due to potentially hazardous substances
that are generally associated with EEE. At the same time, your cooperation in the correct disposal
of this product will contribute to the effective usage of natural resources. For more information
about where you can drop off your waste equipment for recycling, please contact your local city office, waste
authority, approved WEEE scheme or your household waste disposal service.
For more information regarding return and recycling of WEEE products, please visit
www.canon-europe.com/weee.

FCC REGULATIONS

Canadian Radio Interference Regulations
CAN ICES-3(B)/NMB-3(B)
..

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cn20x50 ias h/e1Cn20x50 ias h/p1

Table of Contents