Canon CN20x50 Series Operation Manual page 27

6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
NOTE
• Take care not to damage the drive unit cover when removing the drive unit fixing screws.
• Use a Phillips screwdriver with a shaft diameter of 4 mm or less to remove the drive unit fixing screws.
• Never insert the removed screws into the screw holes in which the drive unit was fixed.
• When the lens is tilted, the zoom ring may turn and the zoom position may change. To retain the zoom position when
the lens is tilted, mount a cinema operation accessory with adjustable torque and with a pitch of 0.5.
6
Place the detached drive unit in the supplied storage
bag.
E20