Connectors And Access Pads Description - Agilent Technologies E2259A User's Manual And Programming Manual

Connectors and Access Pads Description

Module may be
"snapped" in half
along score line.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
There are several connectors and access pads on the Agilent E2259A
Breadboard. Refer to Figure 1-2. Connector P100 provides the carrier
interface to the active electronics on the module. Connector P101 provides
access to the carrier interface; all pins on P101 are mapped to access pads on
P102 (refer to P100, P101, and P102 Pin Assignment on page 16 for detailed
pinout). Access pads J102 and J103 provide access to the buffered input and
output lines, read and write decoder lines, busy line, and power supply
connections (refer to J102 and J103 Pin Assignment on page 15 for detailed
pinout). Connectors J100 and J104 provide connections for user field
wiring. J100 directly maps pin-for-pin to access pads on J101; J104 maps
pin-for-pin to access pads on J105. Figure 1-2 also shows the maximum
component height above the board and maximum lead length below the
board.
Note
Observe the component height restrictions for Regions A and B on the
Breadboard. Region A: 0.21 in (5.3mm); Region B: 0.42 in (10.5mm).
Figure 1-2. Agilent E2259A Connectors Layout
Getting Started 13