Table of Contents
Advertisement
TROUBLESHOOTING
WINE VAULT WALL AND CEILING PANELS
Walls do not align properly
Possible Cause
Floor is not level
Base channel corners are
not square
Panel latch tongue and slots
do not match
Corner "L" brackets missing
Locking latches do not engage
Possible Cause
Foam has leaked into the
latch recesses
5/16" wrench not
fully engaged
DOOR FIT
Door closure mechanism not working properly
Possible Cause
Piston is missing
Piston is not connected
properly
After-market threshold
interferes with door movement
Door sweep interference
Uneven gap on the door latch side
Possible Cause
Base channel shifted or
not properly positioned
Recommended Solution
Level the floor.
Measure the diagonals of the base channel assembly
and adjust as needed.
Panels are upside down. Loosen cams and adjust.
Call 1-877-234-WINE.
Recommended Solution
Carefully remove the foam.
Insert the wrench fully before turning.
Recommended Solution
Call 1-877-234-WINE.
Check the piston and reconnect.
Remove threshold and install properly.
Adjust the door sweep. Make sure that the floor is level
and that there are no obstructions in the door path.
Recommended Solution
Adjust base channel location. Make sure that base
channels are properly secured to the floor.
29
Advertisement
Table of Contents
