5
ISP (InSystem Proramming)
5.2
How to use FLIP
After the program FLIP is installed ( ..\ATMEL\FLIP\flip_xyz.zip, setup.exe)
the user has to select the type of microcontroller (FLIP Menu:
Device/Select). Please select the AT89C5132.
Figure 5-2: Device Selection
On the AT89C5132 controller board set switch S2 to ISP and connect the
board via USB cable with your PC or Laptop:
ISP
Figure 5-3: Switch S2, ISP
48
Position
Execute
Client Application
ISP
Bootloader
Revision 1.00
VPC3+S Evaluation Kit
Copyright © profichip GmbH 2009