Page 1
MWA500 Wi-Fi & Ethernet Module for the Hunter-Pro Series and Captain 8 Intruder Alarm Systems Installation Guide...
Page 2
MWA500 Wi-Fi & Ethernet Module Installation Guide Introduction This guide will help you through the installation and configuration of the MWA500 wi-fi and Ethernet module. It allows users of the Hunter-Pro Series and Captain 8 intruder alarm systems, to use the PIMAlink 3.0 app and cloud service.
Page 3
Configuration Connect the control panel to power. The LEDs on the MWA500 module should turn on. MWA500 SERIAL Connector Control Panel Figure 2. Installation diagram Configuration Account ID Before you configure the module, set the of partition #1 in the control panel to ‘0001’.
Page 4
Limited Warranty PIMA Electronic Systems Ltd. does not represent that its product may not be compromised and/or circumvented, or that the Product will prevent any death, personal and/or bodily injury and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the Product will in all cases provide adequate warning or protection.