Battery Replacement - Honeywell Lutron TouchPRO Wireless LR-HWLV-HVAC Operating Manual

Hide thumbs Also See for Lutron TouchPRO Wireless LR-HWLV-HVAC:
Table of Contents

Advertisement

Available languages

Available languages

Operating Manual

Battery Replacement

Battery Replacement
TouchPRO Wireless Features
The TouchPRO Wireless thermostat has
a coin cell battery that retains the time
and date during a power failure. Under
normal circumstances the coin cell
should last five years. Should the time
and date need to be reset after a power
failure, this is an indication that the coin
cell needs to be replaced. You should
replace the battery every five years, or
before leaving home for an extended
period.
The TouchPRO Wireless thermostat is shipped from the factory with the coin cell installed.
To keep the battery from discharging during shipment and storage, the TouchPRO Wireless
thermostat is shipped from the factory with a plastic tab inserted in the battery holder. This
tab must be removed before the thermostat is mounted on the wall. Simply pull the plastic tab
out of the thermostat. To replace the battery, remove the battery tray using a screw driver.
Place a new coin cell (type CR2032 or equivalent) observing the correct polarity and push the
battery tray into the battery cover assembly.
P/N 041-339 Rev. B
Coin cell
battery tray
12
69-2656EFS—03

Advertisement

Table of Contents
loading

Table of Contents