Honeywell Lutron TouchPRO Wireless LR-HWLV-HVAC Operating Manual page 19

Troubleshooting
Heating or
cooling system
does not respond
P/N 041-339 Rev. B
• Press SYSTEM to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
• Press SYSTEM to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is ON.
• Make sure furnace door is closed securely.
• If "Wait" is displayed, the compressor protection timer is ON. Wait
5 minutes for the system to restart safely, without damaging the
compressor.
17
TouchPRO Wireless
69-2656EFS—03
™