Javad TRIUMPH-LS Update To User Manual page 11

• Level Vial Camera: Shows the pole level vials via the bottom camera. Clicking it will do noth-
ing.
• Offsets: Click to go to the select by offset screen and continue there.
• Screen Center: Centers the screen on receiver position
• Review: Open Review screen.
• Communication type: Shows symbol of active communication channel for receiving the
corrections
6. Information
• Collect Time: It shows elapsed time since collection of a point started.
• Dist to last: Horizontal and vertical distance to the last accepted point.
• Dist/Dir to Last: Horizontal and vertical distance and direction to the last accepted point.
• HRMS: Shows Horizontal RMS of positions. Clicking it will do nothing.
• Velocity (Horiz.): Horizontal velocity calculated by standalone position.
• PDOP: Shows PDOP. Clicking it will do nothing.
• Pdelta: Current position offset from selected 1-st point
• Pdelta2: Current position offset from selected 2-nd point
• Pdelta3: Current position offset from selected 3-rd point
• VRMS: Vertical RMS of RTK position
• RMS Status: Shows RMS for RTK solution
7. Stake
• Accept: Same as regular right bottom 'Accept' button. Accept stake point "as staked". Adds
survey coordinate to design point.
• Accept as: Accept as new point. Creates new survey point. Original design point is not
changed.
• Ahead/Back: Shows direction to target by moving Ahead or Back
• CTT: Course to target point by angle of difference between direction to design point and cur-
rent device orientation.
• CTT Arrow: Course to target point by blue/green arrow
• Catch Point: Calculate catch point offset. Catch point is the point where the alignment de-
sign side slope intersects with the ground.
• Cut/Fill: Shows how much need to pour or dig along a vertical profile (depend of Design
Elevation)
• DTT: Shows distance to current stake point
• Design Elevation: Displays target point altitude. Depends on Antenna height.
• East/West: Shows distance for moving to East or to West.
• North/South: Shows distance for moving to North or to South.
• Offset: Distance from current position to alignment line by perpendicular to that line.
• Right/Left: Shows distance for moving to Left or to Right
• Select From Map: Selecting point for Stake-Out directly from the map.
• Sequence: Set up sequence in which existing points are staked and select subset of points
to be staked.
• Station: Distance from current position to initial station along alignment line.
• Target Name: Displays current Stake-Out point