Displaying Saved Measured Values - Silvercrest 322247 Instructions For Use And Safety Notes

To leave object temperature mode once more, hold the M button
and the S button
9
If you have activated Bluetooth
transferred after the measurement. The thermometer displays the
symbol for Bluetooth
Note: The "HealthForYou" app must be activated for transfer to
occur. If the current data is not displayed on your smartphone,
repeat the transfer process as described in the chapter "transferring
measured values".
The device switches off automatically after 60 seconds, or press
the ON / OFF / MEASURE button
off.
Please note that the displayed temperature is the temperature which
has been determined and is not the adjusted surface temperature.
It cannot be compared with the forehead / ear temperature.

Displaying saved measured values

The device saves the measured values of the last 30 measurements
automatically. If the 30 memory spaces have been exceeded, the
respective oldest measured value will be deleted.
The saved measured values can be requested as follows:
To switch on the multi-function thermometer, press the ON / OFF/
MEASURE button
Press the M button
the display.
If you have activated Bluetooth
transferred after the measurement. The thermometer displays the
symbol for Bluetooth
Note: The "HealthForYou" app must be activated for transfer to
occur. If the current data is not displayed on your smartphone,
at the same time for 3 seconds again.
7
data transfer, the data will be
®
during transfer.
®
for one second.
8
. The last measured value will appear on
9
data transfer, the data will be
®
during transfer.
®
for 5 seconds to switch it
8
GB/IE 55