Initial Use; Inserting / Replacing Batteries - Silvercrest 322247 Instructions For Use And Safety Notes

If batteries have leaked, avoid contact with skin, eyes and mucous
membranes with the chemicals! Flush immediately the affected ar-
eas with fresh water and seek medical attention!
WEAR PROTECTIVE GLOVES! Leaked or damaged
batteries can cause burns on contact with the skin.
Wear suitable protective gloves at all times if such an
event occurs.
In the event of a leakage of batteries, immediately remove them
from the product to prevent damage.
Only use the same type of batteries. Do not mix used and new
batteries.
Remove batteries if the product will not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery!
Insert batteries according to polarity marks (+) and (-) on the
battery and the product.
Clean the contacts on the battery and in the battery compartment
before inserting!
Remove exhausted batteries from the product immediately.

Initial use

The batteries have been installed when you first purchase the prod-
uct. Before first use, remove the protective battery strips sticking
out from the battery compartment. The multi-function thermometer
will then switch on automatically.

Inserting / Replacing Batteries

Before replacing the battery, ensure that the device has been switched
off.
GB/IE 45