Changing Basic Settings - Silvercrest 322247 Instructions For Use And Safety Notes

When the batteries become weak, the battery warning symbol will
appear on the display
possible but the batteries will have to be replaced as soon as possible.
If the battery warning symbol
the display, the batteries must be replaced immediately. If
the batteries are too weak, the thermometer will switch off
automatically.
Proceed as follows to replace the batteries:
Open the screw
using a cross-head screwdriver.
Remove the battery cover
Remove the empty batteries from the battery
compartment.
Insert the new batteries into the battery com-
partment until they audibly and noticeably
click in. Ensure the correct polarity (+/-) of
the batteries.
Reattach the battery cover
Close the screw
cross-head screwdriver.

Changing basic settings

You can configure the following basic settings for the multi-function
thermometer: temperature unit (Celsius / Fahrenheit), date, time and
Bluetooth .
®
46 GB/IE
. Temperature measurements will still be
and "Lo" flash on
on the battery cover
5
.
4
to the battery compartment.
4
on the battery cover
5
4
once more using a
4