Installation - Tripp Lite U224-4R4-R Owner's Manual

7. Installation

PC
DC Power
(5V, 2.0A)
NOTE: The diagram above shows the U224-1R4-R. The U224-4R4-R will
have all 4 USB ports on the Remote Unit.
1. Connect the Local Unit of your Cat5 Extender/Hub to a USB port on your
computer (The red Power LED on the U224-1R4-R local unit will light up to
indicate the unit is connected to a powered-on computer. The U224-4R4-R
does not have a Power LED.)
2. Using Cat5e/6 cable (up to 150 ft. or 45m), connect the Local Unit and the
Remote Unit via the RJ45 ports. (The red Link LED will light up on the
Remote Unit to indicate it is connected to the Local Unit)
3. Connect the included AC Adapter to the Power Jack located on the U224-
1R4-R Local Unit or the U224-4R4-R Remote Unit. Plug into an available
power source.
4. Connect a USB device to any available Local USB port and/or connect a
USB device to any available Remote USB port. (The green USB LED will
light up to indicate a device is plugged into the corresponding port. The USB
LED for the U224-1R4-R Remote USB Port is located between the RJ45
Port and the Power Jack on the Local Unit)
Digital MP3/MP4
Camcorder /Mobile Hard
Local
Unit
Mouse
/Keyboard
Cat5e/6 Cable
Up to 150 ft. (45m)
6
Printer
Remote
Unit