Tractel blocstop BSO Series Original Operation And Installation Manual page 27

that the machine described complies with technological safety standards that were applicable to the equipment in the
EUROPEAN UNION when it was launched on the market by the manufacturer.
The above-mentioned machine matches the model specified on the prototype testing certificate, approved by the
Commissioning the machine is prohibited until the machine in which this is installed complies as a whole with the regulations of
the 2006/42/EC Directive, the corresponding national legislation for implementing the regulations in accordance with national
The valid EN 1808 standard must be applied for the PAM in which the machine is installed.
G905.11 - 01/2015
The manufacturer hereby declares
TRACTEL Greifzug GmbH
Scheidtbachstraße 19–21 51469 Bergisch Gladbach
represented by
Dipl.-Ing. Denis Pradon
General Manager
DECLARATION OF CONFORMITY
APPLICABLE DIRECTIVES AND STANDARDS:
2006/42/EC;
EN 1808; EN ISO 12100
DESIGNATION
Fall arrest device
APPLICATION
Transport of persons
BSO 2050, BSO 2360
SERIAL NUMBER
Year of manufacture
from 01.2010
following certificate numbers
law and the corresponding declaration of conformity has been issued.
Issuer of the prototype testing certificate:
Fachausschuss Bau (BAU) und Tiefbau (TB)
Test and certification centre BG-PRÜFZERT
Landsberger Str. 309
80687 München
notified as No. 0393 at the European Union Commission
Responsible for the documentation:
Dipl.-Ing. Denis Pradon, Tel.: +49 (0) 2202 1004 0
Bergisch Gladbach, date
MODEL
09 261
Installation and operating manual
EN-19