Items Supplied; Intended Use; Technical Data; Before Starting The Equipment - Parkside 42.578.75 Operation And Safety Notes

Anleitung_PET_32_4257875:_
GB/IE/
CY

4. Items supplied

Take all the parts out of the packaging.
Check that nothing is missing.
Electric Stapler PET 32
500 Nails
500 Staples
1 x Allen key

5. Intended use

The electric stapler is designed for stapling and
fastening textiles, leather and wood with the
appropriate staples and nails. The electric
stapler is designed for temporary operation. If
operated continuously, the stapler will become
hot and the increasing heat will reduce its
performance. When hot, interrupt your work
and allow the stapler to cool.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator
and not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
10
28.01.2009 14:31 Uhr Seite 10

6. Technical data

Power supply
Shots per minute
Staple width
Staple length
Staple thickness
Nail length
Nail thickness
Weight
Totally insulated
Sound pressure level L
Sound power level L
Vibration a
Important!
The vibration value changes according to the
area of application of the electric tool and may
exceed the specified value in exceptional
circumstances.

7. Before starting the equipment

Important!
Before you connect the equipment to the
mains supply make sure that the data on the
rating plate are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
Insertion of staples/nails (Fig. 2-4)
Switch the tool off and pull the power plug.
Press the magazine slide (4) together using
your thumb and index finger (Fig. 2).
Pull the magazine slide toward the rear of
the electric stapler (Fig. 3) and out.
Fill the magazine (5) with staples or nails
(Fig. 4).
The maximum filling capacity of the tray is
approx. 85 staples or approx. 75 nails.
Then slide the magazine slide back in until it
stops and snaps noticeably into place.
230 V ~ 50 Hz
max. 30
15 - 25 mm
1.1 - 1.25 mm
15 - 32 mm
1.1 - 1.25 mm
78.1 dB(A)
pA
91.1 dB(A)
WA
5.796 m/s
hv
6 mm
1.6 kg
II/
2