Model Gss108Epp Hardware; Front Panel Model Gss108Epp; Status Leds Model Gss108Epp - NETGEAR GSS108E Hardware Installation Manual

8-Port and 16-Port Gigabit Ethernet (PoE+) Smart Managed Plus Click Switch

Model GSS108EPP hardware

Model GSS108EPP provides eight Gigabit Ethernet ports, of which the four leftmost
ports are PoE+ ports.

Front panel model GSS108EPP

The following figure shows the front panel of model GSS108EPP
Figure 5. Front panel model GSS108EPP
From the left to the right, the front panel contains the following components:
• A Power LED and PoE Max LED (see Status LEDs model GSS108EPP on page 16).
• Eight independent 10/100/1000BASE-T RJ-45 ports, of which ports 1–4 are PoE+
port. All ports provide a left LED that functions as the combined link, speed, and
activity LED. The PoE+ ports provide a right LED that indicates the PoE status (see
Status LEDs model GSS108EPP on page 16).
• An AC power receptacle, placed at a 45-degree angle. (The switch integrates a fixed,
internal power supply unit.)

Status LEDs model GSS108EPP

The following table describes the status LEDs on the front panel of model GSS108EPP
from left to right.
Table 3. Front panel status LEDs model GSS108EPP
LED
Power LED
PoE Max LED
Hardware Overview
Description
Solid green. The switch is powered on.
Off. Power is not supplied to the switch.
Off. Sufficient (more than 7W of) PoE power is available.
Solid amber. Less than 7W of PoE power is available.
Blinking amber. At least once during the previous two minutes, less than 7W of
PoE power was available.
16 Hardware Installation Guide