Subscribe to Our Youtube Channel
Related Manuals for Grundfos KPL.700-1400
Summary of Contents for Grundfos KPL.700-1400
- Page 1 GRUNDFOS INSTRUCTIONS Oil service kit KPL.700-1400, KWM.700-1400 Service instructions...
-
Page 2: Table Of Contents
DN 500 to 650 or for more general service instructions, see the KPL, KWM service instructions, product number 98383809, available in the Grundfos Product Center on Grundfos' homepage, www.grundfos.com. 1.1 Symbols used in this document... -
Page 3: Oil Service Kit, Kpl.700-800 And Kwm.700-800
Where nothing else is indicated, the position numbers refer to fig. 3. Oil service kit, KPL.700-800 and KWM.700-800 and/or the figure below each step. 3.1 Assembling the oil pipe 1. Connect the handle (pos. 24) to the rod (pos. 12). 2. - Page 4 8. Connect the handle with rod, the intermediate pipe with barrel nipple and intermediate pipe (pos. D and step 4) to the isolating valve with barrel nipple and three-way tee fitting (pos. G and step 7). 9. Connect the plug (pos. 19). The oil pipe is now completely assembled.
-
Page 5: Draining The Oil
Where nothing else is indicated, the position numbers refer to fig. 3.2 Draining the oil and/or the figure below each step. 2. Completely loosen the handle (pos. 24). 3. Close the isolating valves (pos. 17 and 31). 4. Insert the assembled oil pipe (pos. 35) in the lower oil plug space (pos. -
Page 6: Filling Oil
4. Connect the funnel (pos. 13) to the intermediate fitting (fig. 1, 3.3 Filling oil pos. 4). 5. Connect the assembled funnel and fitting to the assembled oil pipe (pos. 35). Filling oil, KPL.700-800, KWM.700-800 Fig. 5 Pos. Description Funnel Isolating valve Handle Isolating valve... -
Page 7: Checking The Oil Level
Where nothing else is indicated, the position numbers refer to fig. 3.4 Checking the oil level and/or the figure below each step. 1. Connect the handle (pos. 24) to the rod (fig. 1, pos. 12). 19 33 2. Connect the handle (pos. 24) with rod (fig. 1, pos. 12) to the assembled oil pipe (pos. - Page 8 5. Connect the elbow fitting (pos.15) to the intermediate fitting (pos. 9). 6. Connect the sight glass (pos. 38) with isolating valve (fig. 1, pos. 3) to the elbow fitting (pos. 15) with intermediate fitting (pos. 9 and step 5). 7.
-
Page 9: Oil Service Kit, Kpl.900-1400 And Kwm.900-1400
Where nothing else is indicated, the position numbers refer to fig. 4. Oil service kit, KPL.900-1400 and and/or the figure below each step. KWM.900-1400 1. Connect the handle (pos. 18) to the rod (pos. 9). 4.1 Assembling the oil pipe 2. -
Page 10: Draining The Oil
Where nothing else is indicated, the position numbers refer to fig. 4.2 Draining the oil and/or the figure below each step. 2. Completely loosen the handle (pos. 18). 3. Close the isolating valve (pos. 26). 4. Insert the assembled oil pipe (pos. 27) in the lower oil plug space (pos. -
Page 11: Filling Oil
4. Connect the funnel (pos. 11) to the intermediate fitting (pos. 4.3 Filling oil 5. Connect the assembled funnel and fitting to the assembled oil pipe (pos. 27). Fig. 11 Filling oil, KPL.900-1400, KWM.900-1400 Pos. Description Intermediate fitting 6. Fit the assembled funnel, fitting and oil pipe in the upper Funnel casing plug space (pos. -
Page 12: Checking The Oil Level
4. Connect the sight glass with fittings (fig. 7, pos. 2) to the 4.4 Checking the oil level four-way tee fitting on the assembled oil pipe (pos. 27). 5. Completely loosen the handle (pos. 18). 6. Close the lower isolating valve (pos. 26). 7. - Page 13 Norway Turkey Siu Wai Industrial Centre Phone: +387 33 592 480 GRUNDFOS Pumper A/S GRUNDFOS POMPA San. ve Tic. Ltd. Sti. 29-33 Wing Hong Street & Telefax: +387 33 590 465 Strømsveien 344 Gebze Organize Sanayi Bölgesi 68 King Lam Street, Cheung Sha Wan www.ba.grundfos.com...
- Page 14 98959989 0815 ECM: 1164410 www.grundfos.com...
Need help?
Do you have a question about the KPL.700-1400 and is the answer not in the manual?
Questions and answers