System Information - ViewSat VSMAXHD User Manual

3. SYSTEM INFORMATION

Distributor supports useful information and new software for the receiver.
3. A. RECEIVER INFORMATION
This menu displays the information of S/W version.
3. B.1. USB
21
3. B. RECEIVER UPGRADE
You can upgrade the software of this
receiver through serial port or USB
port when the new software is
released.
Please contact the distributor for
receiver upgrade.
Firmware upgrade using USB flash
drive.
Copy the firmware upgrade file to a
USB flash drive.
Connect the USB flash drive to USB
port in a receiver. Go to "System
Information" then select " Receiver
Upgrade." Select USB and press OK
button.
Select the firmware upgrade file and
press OK.
When file transfer is completed, the
receiver will be automatically rebooted.
3. C. FACTORY DEFAULT
This is to restore the factory set values in case the user has encountered some
problems after changing any new values of channel data and others which may be
an error. Select "Factory Default"menu in "User Setting"menu and press
"OK"key.
If you want to continue, select option"Yes".The receiver will be reset to settings
automatically.
Please note that the "Factory Default"procedure may take a few minutes.
22