General Features; Hardware Description - ViewSat VSMAXHD User Manual

Digital satellite receiver
Table of Contents

Advertisement

GENERAL FEATURES

2. GENERAL FEATURES
- Fully MPEG-2 & DVB-S2 Compliant
- Input frequency 950 ~ 2150 MHz
- Supports EPG,PIG
- Supports SCPC & MCPC from C/Ku-band
- 1 LNB Input Tuner with Loop Through IF Signal
- Tuner Symbol Rate: 1~45MS/s
- Fast booting & auto scan
- Quick channel changing
- Max. 4000 channels (TV & radio) programmable
- True color OSD & easy GUI
- A lot of OSD Language supported
- Radio channel background Display
- Favorite Channel List programmable
- Master PIN Code Function & Parental Lock Function
- 100-Steps Volume control
- Automatic Detection of Forward Error Correction
- Window based S/W Download Program Supported
By RS232 Serial Port
- Set to Set Download (Main Program, Channel Data)
- 7 Keys on the Front Panel (Power On/Off, Channel Up/Down, Volume Up/Down,
Menu, Ok)
- Various LNB Polarity Control
* 22KHz Switching Control
- 3 RCA Output for Video,Audio L/R
- 3 RCA outputs for Component(Y, Pb,Pr)
- USB Host Interface
- S/W Upgade Supported by USB Port
- 9Days EPG (Electronic Program Guide) Support
- S/PDIF Output for Digital Audio
- S-VIDEO Output
- Zoom Function
- Multi Picture
- USALS
7

3. HARDWARE DESCRIPTION

3.1. FRONT PANEL
1) POWER: This key is used to turn the receiver on and off (stand by).
2) CH : These keys are used to change the channels.
3) VOL : These keys are used to increase and decrease the volume level manually.
4) MENU : This key is used to open up the menu.
5) OK : This key is used to enter and confirm any data to the receiver in the menu
systems.
6) INFRARED SENSOR : This is to receive the IR commands from the RCU. Do not
block the view of the sensor.
7) DISPLAY : This display will show the current channel number(* Channel name) .
While the receiver is in standby mode, the display will show the current time.
(* available for VFD model only )
8) USB HOST PORT: This is used to connect your USB Device to your receiver.
(Either front side USB port or rear side must be selected in the menu.)
HARDWARE DESCRIPTION
8

Advertisement

Table of Contents
loading

Table of Contents