Direct Streaming And Switcher Control Via Ethernet - Blackmagicdesign ATEM Mini Installation And Operation Manual

To change the HDMI output source, press any of the video out buttons. For example you can
select the HDMI inputs for isolated camera recordings, or select the program output or
multiview. Compared to ATEM Mini, having the buttons built into ATEM Mini Pro means you can
change the HDMI output directly from the unit itself!
NOTE If you want to switch camera 1 direct or preview to the HDMI output, these
sources are available from the 'output' drop down menu in ATEM Software Control.

Direct Streaming and Switcher Control via Ethernet

ATEM Mini Pro's Ethernet connector lets you stream directly while simultaneously providing the
added benefits of ATEM Software Control. You can learn more about this powerful control
software in the 'using ATEM Software Control' section.
Plug into your internet router via Ethernet to stream directly
To set up your ATEM Mini Pro for software control and direct streaming:
1 Plug ATEM Mini Pro into your computer's spare Ethernet port. It may take a moment for
DHCP to find ATEM Mini Pro and assign an IP address.
2 Launch ATEM Software Control.
3 You will see ATEM Mini Pro listed as a connected ATEM switcher on your network.
Simply select ATEM Mini Pro from the list.
4 Click 'connect'.
ATEM Software Control will now appear with buttons and indicators illuminated. You can now
operate your ATEM Mini Pro the same way you would via USB-C.
If your computer is connected to the internet, this also sets up your ATEM Mini Pro for direct
streaming via your computer. Keep reading for details on how to set up a direct stream.
Direct Streaming by Sharing Your Computer Internet
With ATEM Software Control now connected to your ATEM Mini Pro, you can set up a direct
stream via your computer's internet connection.
You can select which platform you want to use in ATEM Software Control and set all the relevant
settings for your stream. If you are setting up a broadcast on your channel that you will regularly
use, these settings will be stored in your ATEM Mini Pro and you can then plug into any internet
connection at any time and broadcast directly from the unit.
This section includes how to configure settings for YouTube Studio and Twitch.
TIP
As you're setting up your broadcast, it's worth loading a standby graphic into
ATEM Software Control's media player and switching it to the program output so you
can perform a quick test broadcast before actually going live.
Additional Features on ATEM Mini Pro 17