Blackmagicdesign ATEM Mini Installation And Operation Manual page 119

For example, to change the border softness on a wipe transition
1 Press the 'wipe' button.
2 Press the right arrow button next to the LCD to move to the third page of settings.
3 Rotate the control knob under the 'softness' setting to change the softness of the wipe
transition border.
If you want to change the direction of the wipe transition
1 Press the arrow buttons to navigate back to the first page of wipe transition settings,
or simply press the 'wipe' button to return to the first page.
2 Press the 'reverse direction' soft button at the top of the LCD to change the direction.
3 Once you are satisfied with the setting, press the 'home' button to return to the
home page.
TIP When changing the border softness, you can visually monitor your adjustments in
real time. Simply press the PREV TRANS button and move the fader bar while
watching the preview output on the multi view to visually monitor your settings.
Remember to press PREV TRANS again to disable the transition preview when you're
happy with the settings.
The system control buttons and LCD menu are used to access all the settings for your panel,
and you can even set general switcher settings directly from the panel. For example, if you
need to change the switcher's video format.
System Control
Joystick and Numeric Keypad
The number pad is used to enter numerical data. For example, the number pad can be used
to enter a numerical value for transition duration. When entering data using the number pad,
the soft buttons below each parameter are used to apply the entered data to that parameter.
The Joystick is a 3-axis joystick that is used to size and position keys, DVEs and other elements.
On larger ATEM switchers with an RS-422 'remote' port, the joystick can also be used to control
VISCA PTZ cameras.
Using ATEM 1 M/E Advanced Panel 119