Advertisement
Assembly Instructions
Disassembly of Existing Parts
Refer to Figure 1:
1.
Remove pull ropes (#2) from transport locks (#1) and
discard.
NOTE: Do not disconnect hydraulic hoses (#3) from
straight adapter fittings (#4) when installing this kit
on Model AFM4522 mower.
AFM4211, AFM4214, & AFM4216 Only:
2. Disconnect hydraulic hoses (#3) from straight
adapter fittings (#4). Keep hoses for reattaching to
the hydraulic fittings later.
Disassembly of Existing Parts
Figure 1
Locate & Drill Mounting Holes
Older models will not have mounting holes and will need
to be drilled. The mounting holes are located differently
depending on which model the kit is attached to.
Model AFM4211
Locate and drill four 13/32" diameter holes in the toolbar
lock-up plate as shown in Figure 2.
Models AFM4214 & AFM4216
Locate and drill four 13/32" diameter holes in the toolbar
lock-up plate as shown in Figure 3.
Model AFM4522
Locate and drill four 13/32" diameter holes in the toolbar
lock-up plate as shown in Figure 4.
2
AFM Hydraulic Wing Unlock Assembly Instructions Manual No. 315-731M
35488
Hole Pattern for AFM4214 & AFM4216
Hole Pattern for AFM4211
Figure 2
Figure 3
Hole Pattern for AFM4522
Figure 4
35482
35482
35482
2/1/19
Advertisement
