Solving Problems; General - Asko OCSM8487 Series Instructions For Use Manual

Hide thumbs Also See for OCSM8487 Series:
Table of Contents

Advertisement

SOLVING PROBLEMS

General

EN 42
If you have problems with your oven, then consult the error overview
below. Should the problems persist, then please contact the Customer
Services Department.
The food stays raw.
• Check whether the timer has been set and you have touched the
'confirm key'.
• Is the door closed properly?
• Check whether a fuse has blown or a circuit breaker has been
activated.
The food is overcooked or undercooked.
• Check whether the correct cooking time has been set.
• Check whether the correct power has been set.
The keys do not respond; the display is locked.
• Disconnect the appliance from the power supply for a few minutes
(remove the mains plug from the socket or switch the circuit
breaker to off); then reconnect the appliance and switch it on.
Sparking in the oven space.
• Ensure that all cover panels from the lamps are secure and that all
spacers are placed on the guide rails.
Power failure can cause the display to reset.
• Disconnect the appliance from the power supply for a few minutes
(remove the mains plug from the socket or switch the circuit
breaker to off); then reconnect the appliance and switch it on.
• Set the time again.
There is condensation in the oven.
• This is normal. Wipe the oven clean after use.
The fan keeps working after the oven is switched off.
• This is normal. The fan will keep working for a while after the oven
is switched off.
Air flow can be felt at the door and the exterior of the appliance.
• This is normal.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bo4to1f5-42

Table of Contents