Salus VS10WRF Full User Manual page 75

dXX Function
d06 (only
TRV control algorithm
with TRV)
d07 Valve protection
d08 Frost protection temperature
d09 Time format
Time zone (reserved for
d10
internet wireless)
d11 Summer time change
d12 Heating temperature limit
d13 Cooling temperature limit
Max floor temperature
d14 (active in heating mode when
d04=1)
Min floor temperature
d15 (active in heating mode when
d04=1)
Lower floor temperature limit
d16 for cooling (Function active
when d04 = 1).
FEATURES AVAILABLE ONLY FROM THE APPLICATION LEVEL:
Allow buttons to be unlocked
d17
from the thermostat
Deactivate the need to
confirm the change of the
d18
temperature setpoint by
pressing the
Parameter
Values
0
1
2
0
1
5-17°C
0
1
from -13 to
+13 hours
0
1
5-35°C
5-40°C
To protect the floor against overheating, the heating will be switched off when
6-45°C
To protect the floor, heating will be activated when the minimum floor sensor
6-45°C
6-45°C
0
1
0
1
button.
Description
Standard ON/OFF algorithm
Automatic selection
Advanced self-learning algorithm
Frost protection temperature (and for holiday mode)
12 hours
24 hours
It gives you the possibility to fit the thermostat time zone to yours
(every 1 hour step).
Disabled
Maximum heating/cooling temperature that can be set by the user
Minimum heating/cooling temperature that can be set by the user
the maximum temperature of the floor sensor is reached.
temperature has been reached.
To protect the floor, cooling will be switched off when the set minimum
temperature is reached.
Disable
Enable
Enabled
OFF
ON
OFF
ON
Default
Values
1
1
5°C
1
0
1
35°C
5°C
27°C
10°C
6°C
1
0
75