Subscribe to Our Youtube Channel
Related Manuals for SBS SBS-2510
Summary of Contents for SBS SBS-2510
- Page 1 SBS-2510 Digital Density Meter User Manual 1-800-554-2243 www.sbsbattery.com Test@sbsbattery.com...
-
Page 3: Table Of Contents
Transfer Results (printing, exporting, pairing w ith SBS-6500) 6.1 Saving and exporting data................14 6.1.1 USB stick data transfer option..............14 6.1.2 Bluetooth export of results to SBS-6500 battery resistance tester……. Maintenance 7.1 Maintenance schedule..................15 7.2 Clean the SBS-2510 .................. -
Page 4: Introduction
About this document This document prov ides y ou with the inf ormation y ou need to get started with y our SBS handheld SBS-2510. The instructions in this document ref er to SBS-2510 running f irmware v ersion V1.0.0 or higher. -
Page 5: Definitions Of Signal Words And Warning Symbols
2.2 Product specific safety notes Intended use The SBS-2510 is designed to be used by trained staf f and is intended f or measuring the density of liquid samples that are compatible with the materials with which they come into contact. - Page 6 CAUTION Injury due to incorrect handling of the battery The battery can explode or ignite and cause injury or damage the SBS-2510 if it is not handled correctly . 1 Do not store or use the battery at temperatures below -20 °C or abov e 60 °C.
-
Page 7: Design And Function Instrument Overview
. Nav igation joy stick To nav igate through the menus. 10 Key 1 To start up the SBS-2510, select menu items and to nav igate. 11 Key 2 To select menu items and to nav igate. 12 Key 3 To select menu items and to nav igate. -
Page 8: User Interface
3.2.2 Icons on the screen Icon Location Explanation Status ribbon SBS-2510 is sending data to the printer. Status ribbon Shows the charge of the battery . Status ribbon Battery is charging. Sampling ribbon Sy ringe mode activ ated. The sample pump is deactiv ated. -
Page 9: Installation And Commissioning
2510-COVER Protectiv e Cov er – User Manual 4.2 Unpack the SBS-2510 1 Remov e the SBS-2510 f rom the protectiv e packaging. 2 Store the packing material f or later transport ov er long distances. SBS-2510 Digital Density Meter... -
Page 10: Charge The Sbs-2510
5 If parts are missing or damaged, report it immediately and f ile a f reight claim if needed. 4.3 Charge the SBS-2510 Y ou can either charge the SBS-2510 using the supplied AC adapter or a computer. Recharging an empty battery takes approximately three hours. -
Page 11: Setup For Working With The Sample Pump
3 Insert the USB-A plug in the USB-A socket of the computer. The SBS-2510 starts charging and the icon is display ed. Setup for w orking w ith the sample pum p 4.4.1 Activ ate the sample pump mode 1 Press the Menu key . -
Page 12: Operation 5.1 Start Up The Sbs-2510
A short beep is play ed. A welcome message is display ed. The home screen opens. The SBS-2510 is ready to use. 5.2 Shut dow n the SBS-2510 − Press and hold any of the key s or the nav igation joy stick f or more than 3 s. -
Page 13: Typical Phases Of Density Determinations
Y ou can use the sample pump or sy ringes to f ill, drain and rinse the measuring cell. The sample pump is used f or samples with a v iscosity up to 100 mPa*s. Sy ringes are ty pically used if the v iscosity of the samples is abov e 100 mPa*s. SBS-2510 Digital Density Meter... -
Page 14: Prepare The Measuring Cell For The Next Sample
The SBS-2510 prompts users to enter the Sample ID entry Variable sample ID bef ore the density is measured. The SBS-2510 prompts users to f ill and drain the Fill cycle measuring cell twice and then f ill the measuring cell f or the measurement. -
Page 15: Perform The Density Determination
None 5.5.2 Perform the density determination Start the method The SBS-2510 is set up to work with the sample pump. The piston is in the lowermost position. The home screen is open. 1 Mov e the nav igation joy stick to the lef t. -
Page 16: Transfer Results (Printing, Exporting, Pairing With Sbs-6500)
Other methods of retrieving, printing and exporting data are possible. 6.1.1 USB stick data transfer option 1 Insert a compatible USB driv e into the USB socket of the SBS-2510 Digital Density Meter. (USB drive must be formatted in the FAT32 file format) 2 Press the Results button on the main screen of the unit. -
Page 17: Bluetooth Export Of Results To Sbs-6500 Battery Resistance Tester
(Guidance on the operation of the SBS-6500 unit is in its own operating manual.) Below is a link f or the f ull SBS-6500 Battery Analy zer Manual) https://www.sbsbattery .com/media/PDFs/SBS-6500-Battery -Analy zer-Manual.pdf... -
Page 18: Clean The Sbs-2510
1 Make sure the cleaning agent is compatible with t he material of the part y ou want to clean. 2 Make sure that no liquid enters the interior of the SBS-2510. If y ou hav e questions about the compatibility of cleaning agents, contact y our authorized SBS sales representativ e or dealer. -
Page 19: Check The Measurement Accuracy
9 Clean the end of the f illing tube with a clean tissue. 7.3 Check the m easurement accuracy To check the measurement accuracy of the SBS-2510, y ou need to conf igure and perf orm a test 7.3.1 Example: Test w ith w ater The f ollowing chapters show y ou how to conf igure and perf orm a guided test with deionized water at room temperature 77.0°F (25 °C). -
Page 20: Perform The Test
The result is not printed. 7.3.1.2 Perform the test Start the test The SBS-2510 is set up to work with the sample pump. The measuring cell has been cleaned. The piston is in the lowermost position. 1 Press the Menu key . -
Page 21: Measures If A Test Fails
Page 16 7.4 Replace the battery The SBS-2510 works with a rechargeable 2400 mAh Li-Ion battery that y ou can order f rom Storage Battery Sy stems, LLC. 1 Press on the lower part (1) of the battery cov er and push the battery cov er up. -
Page 22: Prepare The Sbs-2510 For Storage
4 Reinstall the cov er of the sample pump. 7.6 Prepare the SBS-2510 for storage The SBS-2510 can be stored at temperatures of -4…+122 °F (-20…+50°C). But the lif espan of the battery is reduced when it is stored at high temperatures. - Page 23 Altitude Up to 6560 Feet (2000 m) abov e sea lev el Pressure Atmospheric pressure In interior spaces Ov erv oltage category Pollution degr ee IP code IP5X Storage temperatures Characteristic Value Instrument -4…122F (-20°C…+50°C) SBS-2510 Digital Density Meter Meter...
- Page 24 0...72 °Bé Heavy Baumé Accuracy ±0.1 °Bé 50…122F (10…50°C) Temperature range % w/w 0.0…100.0% w/w Concentration range Accuracy ±1.0% w/w 50…122F (10…50°C) Temperature range % v/v 0.0…100.0% v /v Concentration range Accuracy ±1.0% v /v SBS-2510 Digital Density Meter Meter...
- Page 25 Characteristic Value 0.0…85.0% w/w Range Brix (d) % w/w Accuracy ±0.3% w/w 0.0…85.0 °P Range Plato Accuracy ±0.3 °P SBS-2510 Digital Density Meter Meter...
- Page 26 SBS-2510 Digital Density Meter Meter...
- Page 27 SBS-2510 Digital Density Meter Meter...
- Page 28 April 2020 SBS-2510 Users Manual, Rev. 04-20-IOM2510...
Need help?
Do you have a question about the SBS-2510 and is the answer not in the manual?
Questions and answers