Caring for your monitor
Detaching the monitor base and stand
Wall Mounting (Optional)
Be sure to turn off the power before you perform any maintenance on the monitor�
Do not:
•
Apply water or liquid directly to your monitor�
•
Use solvents or abrasives�
•
Use flammable cleaning materials to clean your monitor or any other electrical
equipment�
•
Touch the screen area of your monitor with sharp or abrasive items� This type of
contact may cause permanent damage to your screen�
•
Use any cleaner which contains an anti-static solution or similar additives� This may
harm the coating of the screen area�
Do:
•
Lightly dampen the provided dedicated lens cloth with water and use this to gently
wipe the covers and the screen�
•
Remove grease or finger marks with the provided dedicated lens cloth and a little
mild detergent�
Step 1: Place the monitor on a soft and flat surface�
Step 2: Remove the screws from base before detaching base and stand from the monitor�
Refer to the instructions that come with the base mounting kit� To convert your LCD
display from a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord�
Step 2: Lay the LCD display face down on a towel or blanket�
Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and
stand"�
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit
(100mm x 100mm distance), VESA Mounting Screw M4 x 8 mm�
VESA hole
VESA hole
Step 5: Attach the LCD display to the wall, following the instructions in the wall-mounting
kit�
For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg
1
Chapter 2� Adjusting and Using your monitor2-10