Table of Contents
Advertisement
ARROW DIRECT — Activates Output 13 & Output 14 as 2 trigger traffic director:
7. F5S-IQ TOUCHPAD PROGRAMMING
The F5S-IQ system provides access to the following features: display intensity, push-buttons backlight inten-
sity, push-buttons ON light intensity through touchpad programming.
To make settings adjustments follow these steps:
Step 1:
Press and hold down SW8 and SW10.
Step 2:
Enter "BACKLIGHT" setup.
To adjust press SW9 to decrease, SW10 to increase.
Press SW8 to save and move to next function.
Step 3:
Enter "KEYBRIGHT" setup.
To adjust press SW9 to decrease, SW10 to increase.
Press SW8 to save and move to next function.
Step 4:
Enter "DISPBRIGHT" setup.
To adjust press SW9 to decrease, SW10 to increase.
Press SW8 to save and exit programming
8. F5S-IQ VOLTAGE CALIBRATION
The F5S-IQ system provides a continuous battery voltage reading on the touchpad's display. After a setup
update, the display will show "Voltage 0V" even though the voltage input is connected to the battery. The
system needs a voltage reading calibration.
To make adjustments follow these steps:
Step 1:
Using a multi-meter measure the input voltage in the IQ system.
Step 2:
Press and hold down SW8 and SW10.
Step 3:
Enter "BACKLIGHT" setup.
Continue to hold down SW8 and release SW10.
Step 4:
Enter "RELAYBOX INPUTS" status. Release SW8.
Press SW8 to save and move to next step.
Step 5:
Enter "LIGHTBAR INPUTS" status.
Press SW8 to save and move to next step.
LEFT ARROW—Output 13 continuous ON
RIGHT ARROW—Output 14 continuous ON
CENTER OUT—Output 13 & Output 14 continuous ON
8
July 31, 2019
- Quick Links:
- 7-F5S-Iq Touchpad Programming
Hide quick links:
Advertisement
Table of Contents
