TracVision A5 Installation Guide
4. Plug the other end of the power cable into the
"Vehicle Power" jack on the receiver's rear panel.
5. Reconnect the battery lead or vehicle fuse that
you removed in Step 2.
3.12
3-2
Mounting the Receiver
Once all cables are connected, mount the receiver
inside the vehicle.
Do not block the receiver's ventilation
openings. These openings ensure reliable
operation of the receiver and protect it from
overheating.
1.
Using the supplied #8-32 x
washers, attach the two L-shaped brackets to the
sides of the receiver.
2.
Using the #6 x
1
⁄
" self-drilling screws, secure the
2
receiver brackets to the mounting surface.
Mounting the Receiver
5
⁄
" screws and lock
1 6
#6 Screw
Bracket
Lock Washer
#8-32 Screw
54-0208-01