Entering/Exiting The Platform - JLG EcoLift 50 Operation And Safety Manual

SECTION 3 - MACHINE OPERATION
a. EcoLift 50 - After entering the platform, verify the front
castor has retracted and machine is resting on the front
rubber foot pads.
b. EcoLift 70 - Lock each of the front castor wheels before
entering the platform.
3. Ensure the level indicator is centered and machine is level.
4. Ensure the bubble level indicator is centered and machine is
level.
3-6

Entering/Exiting the Platform

DO NOT EXCEED MAXIMUM PLATFORM CAPACITY. MAXIMUM CAPACITY INCLUDES
PERSONNEL IN PLATFORM PLUS WEIGHT IN TOOL TRAY OR ANY OTHER WEIGHT
PLACED IN PLATFORM.
1. Always maintain "three point contact" with the machine,
using two hands and one foot or two feet and one hand at
all times during entry and exit.
2. Attach lanyard to the lanyard attachment point in the lower
right hand corner of the mast.
3. Ensure entry gates are fully closed after entering.
4. Once in the platform and the entry gates have fully closed
the platform is ready for operation.
BEFORE OPERATING PLATFORM, CHECK AROUND AND OVERHEAD FOR ANY OBSTA-
CLES OR PERSONNEL THAT MAY COME INTO CONTACT WITH MACHINE WHILE ELEVAT-
ING OR LOWERING THE PLATFORM. IF NECESSARY, EXIT MACHINE AND REPOSITION
BEFORE PROCEEDING.
5. Fully lower the platform before exiting through the gates.
31215860