Function Introduction; Initialization; Change Password; Set The Time Zone - iTrack Long Life GPS108 User Manual

Table of Contents

Advertisement

8. Function Introduction

8.1. Initialization

Send SMS "begin+password" to tracker, it will reply "begin ok" and return to the default
factory settings. (Default password: 123456). For example - "begin123456", the device will
reply "begin ok".

8.2. Change Password

8.2.1. Send SMS "password+old password+space+new password" to the tracker to change
the password. For example: Send SMS "password123456 888888" to tracker, it will
reply "password OK", it means the password has changed successfully. And please
make a note of the new password and keep it safe.
8.2.2. Note: The new password must be 6 digits (numbers), or the tracker can't recognise.
8.2.3. When reading this user manual, you will notice that we have used "+" and "space"
between some words;"+" between two words means they should be written together
as one word and "space" between two words means you should leave one character
space between two words.

8.3. Set the Time Zone

Send the SMS command "time+space+zone+password+space+time zone" to the
8.3.1.
tracker to change the time zone. For example: Send SMS "time zone123456 0" to
set the time zone for the UK (0 = GMT). When the clocks go forward in the
summer you would send the SMS command: "time zone123456 1" to set the time
zone to +1.

8.4. Add and Delete Authorised Phone Numbers

8.4.1. You must setup the authorised phone numbers before using geo-fence alarm,
movement alert etc. Up to 5 numbers can be authorised.
8.4.2. Authorisation: Send SMS command "admin+password+space+cell phone number"
to set up an authorised number. The other authorised numbers should be set by the
first authorised number. If the number is successfully authorised, the unit will
reply " admin OK" by SMS. Please avoid using international format – e.g. '+44'
8.4.3. Alternatively you can call the tracker 10 times continuously and get its position,
then it will save the cell phone number as the authorised number automatically. It
will reply "add master ok".
8.4.4. Delete authorisation: Send SMS "noadmin+password+space+authorised number" to
delete the authorised number.
www.itrackgpstrackers.com
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Long life gps108-pro

Table of Contents