iTrack Long Life GPS108 User Manual page 18

Adding your device to the platform
You now you need to add your tracker to the iTrack Live GPS Tracking Platform – you can
add multiple trackers. From the control panel on the left hand side click the arrow icon
with the green'+' sign as shown below. You will need the IMEI number of the tracker
which can be found on a sticker in the battery compartment (alternatively send the SMS
command imei123456 and the device will send the IMEI via SMS).
Once the 'object' is added you can then click the three small dots to control the tracker.
Once you have added the tracker to the object list you can now begin to control the monitor
and control the tracker. When the device is online the signal icon will turn green – if the
icon is grey this means the tracker is offline or has no GPRS reception.
GPRS settings must be configured before the tracker will show online (see section 5.19).
You will now be able to use the iTrack Live GPS Tracking Platform and all of its features.
To set continuous tracking intervals follow the steps below:
Click 3 dots icon > Send Command > Select 'Position Interval' template > edit
command to required time interval in seconds
You can set the local time of the tracker as follows:
Send SMS Command: time+space+zone+password+space+time zone
Example for UK time zone: time zone123456 0
Note: You would need to change the time zone to '1' during British
You can view historical location records as follows:
Click 3 dots icon > Show History > Choose parameter
It is possible to view a simulated route repeat when viewing the history. You are able
to speed the timeframe up to 6x.
Summer Time
www.itrackgpstrackers.com 17