Toro TXL 2000 Operator's Manual page 17

Accessing Protected Menus
The T S
RANSPORT PEED
S M of the InfoCenter. These settings are
ETTINGS ENU
in the Protected Menu.
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your Authorized Service Dealer for assistance.
1. From the M M
AIN
scroll down to the S
right button (Figure
2. In the S
ETTINGS
scroll down to the P
the right button (Figure
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 26B and
is adjustable within the
, use the center button to
ENU
M and press the
ETTINGS ENU
25).
Figure 25
M , use the center button to
ENU
M and press
ROTECTED ENU
26A).
Figure 26
Figure 26C). Repeat this step
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 26D).
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
You can view and change the settings in the
P M
ROTECTED ENU
M , scroll down to P
ENU
Use the right button to change the setting. Setting
the Protect Settings to O
change the settings in the P
entering the PIN code. Setting the Protect Settings
to O hides the protected options and requires you
N
to enter the PIN code to change the setting in the
P M
ROTECTED ENU
Setting the Maximum Allowed Transport Speed
1. In the S
ETTINGS
g264775
S and press the right button.
PEED
2. Use the right button to increase the maximum
transport speed (30% to 100%).
3. Use the center button to decrease the maximum
transport speed (30% to 100%).
4. Press the left button to exit.
5. When finished with the P
the left button to exit to the M
press the left button to exit to the R
g264249
17
. Once you access the P
S
ROTECT ETTINGS
allows you to view and
FF
M
ROTECTED
.
M , scroll down to T
ENU
ROTECTED
M
AIN
ROTECTED
option.
without
ENU
RANSPORT
M , press
ENU
, then
ENU
M .
UN ENU